Insights · Carbon potential

Best trees for carbon capture in the tropics

Search for the best trees for carbon capture and you will find lists of champion species. For a carbon project they are the wrong place to start. The best tree is the one that survives on your site for 40 years, suits the ecosystem and is wanted by the people who live there. Climate sets the ceiling; species, wood density and survival decide how close you get to it.

Feasibility.Earth team, Green Earth Group · Updated

The climate zone sets the ceiling

Before species, there is climate. The IPCC's default growth rates for regrowing forest (2019 Refinement, Volume 4, Table 4.9) differ by ecological zone far more than most species lists admit. Converted to CO2, the rates we have used in real screenings for stands up to 20 years old run from 0.775 tCO2e per hectare per year in African tropical shrublands to 13.097 in African rainforest. That is a factor of about 17.

No species choice closes that gap. A well-chosen tree on dry savanna with about 800 mm of rain will not grow like a tree in a rainforest climate with 1,500 mm or more. In our screenings, the Kenyan dryland site in the shrubland zone was almost entirely eligible but had the weakest carbon case. The full rate table is in carbon sequestration per hectare.

So the first honest question is not “which tree?” but “what does this climate allow?”

What species decide within the ceiling

Inside a zone, species matter a lot. The IPCC itself shows it. Table 4.10 gives growth for tropical plantations by genus. For tropical moist deciduous forest in Africa it lists eucalyptus up to 20 years old at 20 tonnes of dry matter per hectare per year and “other” species at 9 (range 3–15). Natural regrowth in the same zone, from Table 4.9, is 2.9. Those are above-ground defaults, but the ratio is the point: a fast plantation genus, a mixed planting and natural regrowth can differ several-fold on the same climate.

Three properties drive that difference:

  • Growth rate. How much wood volume a tree adds each year on this soil and rainfall.
  • Wood density. Carbon is in mass, not volume. A dense hardwood stores more carbon per cubic metre than a light, fast softwood. VM0047 estimates biomass with published allometric equations: forest-type equations for mixed stands and natural regeneration, and species-, genus- or family-specific equations, local before global, for single-species plantings, so the species choice shows up directly in the numbers.
  • Survival and lifespan. A seedling that dies in the first dry season stores nothing. A short-lived pioneer that falls over at year 15 gives back much of what it stored. Over a 40-year crediting horizon, survival beats speed.

A practical way to use these three properties is to ask, for each candidate species: has it survived in plantings within this ecoregion, at this rainfall? Is it on any invasive list? Is there a published wood density and an allometric equation for it, or at least for its genus? Will the landowner keep it standing for 40 years? A species that fails any of those questions is a risk to the carbon case, however fast it grows.

That third point is why we do not publish a ranking of “best carbon species”. Survival depends on soil, rainfall timing, grazing, fire, pests and whether the farmer wants the tree. None of those are in a growth table.

The red flag: invasive species

Some of the fastest-growing trees used in tropical planting are also among the worst invaders. The IUCN Global Invasive Species Database lists “100 of the World's Worst Invasive Alien Species”. The trees on it include black wattle (Acacia mearnsii), leucaena (Leucaena leucocephala), mesquite (Prosopis glandulosa), maritime pine (Pinus pinaster), the trumpet tree (Cecropia peltata) and the African tulip tree (Spathodea campanulata) outside its native range.

Several are fast-growing or nitrogen-fixing trees that have been planted widely on purpose. They spread because little stops them, and that is the problem: they spread into grassland, riverbanks and remnant forest, use water and crowd out native plants. A project that plants a known invader takes on an ecological risk, a reputational risk for every buyer of its credits, and a safeguard problem at validation. Check every species against the GISD and your national invasive species list before it goes into a design.

Native vs exotic: the trade-offs

Native and exotic species in a tropical ARR project
Native speciesExotic plantation species
Early growthOften slower, varies widelyOften faster; highest rates in IPCC Table 4.10
AdaptationAdapted to local drought, pests and fireDepends on match to climate; new pests can arrive
Seed and nursery supplyOften limited; needs collection and nursery skillsUsually easy to source
BiodiversitySupports local wildlife and ecosystem functionLow in single-species stands
Invasion riskNone in native rangeReal for some genera; check GISD
Local use and valueDepends on the species and the communityOften timber or pulp markets

Survival is where the trade-off usually tips. An exotic species chosen for speed on a research station can fail on a farm with goats, a late rainy season and no watering. A native species that grows more slowly but resprouts after fire or browsing may hold more carbon at year 40 than the faster tree that died at year five. Ask for survival data from plantings nearby, not growth data from somewhere else.

Many good projects mix the two: native species for most of the area, with useful non-invasive species for farmers in agroforestry plots and woodlots. The mix should come from what grows and survives locally, and from what the landowners will protect. The same reasoning applies to agroforestry carbon credits, where the trees share land with crops.

Monocultures, VM0047 and the safeguards

VM0047, Verra's methodology for afforestation, reforestation and revegetation, does not ban single-species planting in the text we have read. It includes rules for monoculture stands, for example on which root-to-shoot ratios and allometric equations to use. What it does exclude are projects where clearing existing woody biomass involves timber harvesting or degrades native ecosystems, and the removal of natural forest or native tree species as part of site preparation.

The wider integrity frameworks go further. The ICVCM, whose Governing Board approved VM0047 in December 2024, includes in its Core Carbon Principles a principle on sustainable development benefits and safeguards: carbon-crediting programmes must make sure activities meet or exceed industry best practice on social and environmental safeguards. In practice, a single exotic species over a large area invites questions on biodiversity, water and land use that a mixed native planting does not.

Monocultures also concentrate risk. One pest, one disease or one fire season can hit the whole stand. Under Verra, the share of credits set aside against losses, the non-permanence buffer, is assessed at validation with the VCS AFOLU Non-Permanence Risk Tool. A fragile stand makes that conversation harder.

How our species screen works

Species are part of every carbon feasibility study we run. The screen is deliberately modest:

  1. Place the site

    We assign the land to its ecoregion and IPCC ecological zone, using the boundary you upload. Examples from real studies: dry miombo woodlands in Malawi, acacia bushland in Kenya, Albertine Rift montane forests in Uganda.

  2. Check the species you plan

    If you list species in the intake, the species screen starts from those, alongside the site's climate and terrain in the same report.

  3. Shortlist when none are given

    If you have not chosen species yet, we build a shortlist from registered ARR projects in the same ecoregion: species other projects have actually put in the ground under a carbon standard.

  4. Keep the carbon numbers honest

    The carbon projection uses IPCC Tier 1 rates by zone, in conservative, average and optimistic cases, and labels them gross. Species-specific growth comes later, from field trials and local data.

More on how removals are projected sits on the reforestation feasibility page.

Frequently asked questions

There is no single answer that holds across sites. Fast-growing plantation genera such as eucalyptus post the highest growth rates in the IPCC tables, but growth on paper is not carbon stored over 40 years. The best tree for carbon capture is one that survives on your soil and rainfall, is not invasive, and that local people want to keep.

Sources

Which species fit your site?

The Full Feasibility Study maps your ecoregion and IPCC zone, screens the species you plan (or shortlists species used by registered ARR projects nearby) and projects removals over 40 years. $7,500, 5 business days.