Insights · Land eligibility
How to make a KML boundary for a carbon project
Every carbon project starts with a line on a map. A feasibility screening needs it to know which land to test, and Verra needs it to know which land the credits come from. This is a practical guide to drawing that line as a KML file, in Google Earth Pro or QGIS, and to the mistakes that most often make a boundary unusable.
What a KML file is
KML (Keyhole Markup Language) is a text format for geographic data. It began in Google Earth and is now an open standard of the Open Geospatial Consortium (OGC): version 2.2 was adopted as an OGC implementation standard, and version 2.3 is the current one. Almost every mapping tool can read and write it.
A project boundary in KML is a polygon: an outer ring of points, and optionally inner rings for holes. Each point is written as longitude, then latitude, then an optional altitude, in decimal degrees, with no spaces inside a point. The last point of a ring must be the same as the first. You will rarely edit this by hand, but knowing it helps when a file does not load.
A KMZ is a compressed package containing a KML file. Google Earth Pro saves places as KMZ by default. Either format works for a screening.
- FormatKML or KMZ
- Point orderLongitude, latitude
- ShapeClosed polygon(s)
Why the boundary matters
The boundary decides what is measured. In a land eligibility check, every layer, from forest cover in 2000 to built-up land and slopes, is computed inside the polygon you draw. Draw a few hectares of forest edge in by mistake and they appear as ineligible area; leave out a field and it is never tested.
For registration, the requirements are formal. The VCS Standard v4.7, Section 3.11.2, requires AFOLU projects to provide a KML file with geodetic polygons that precisely delineate the project zone where reductions and removals occur. Where the project zone has several parcels, the location details of each go into the project description; non-contiguous parts of a grouped project must appear as separate polygons. And at the project start, the KML must exclude non-eligible areas and areas that are not part of the project area under the methodology, such as roads, water bodies, waterways and settlements.
That is why the order matters. Draw the whole property first, let a screening show which parts are eligible, and draw the registration boundary from that. The 10-year rule explains why forest history removes the most land.
How to make a KML file in Google Earth Pro
Google Earth Pro is free for desktop and is the easiest route if you know the land but do not use GIS software.
Find the land
Search for the nearest town and zoom in until you can see field edges, tracks and rivers clearly. Use the historical imagery slider if recent images are cloudy.Draw the polygon
Use the polygon tool above the map (Add Polygon). Click on the map to place points along the boundary, following fences, rivers or tracks you can see. More points on curves give a truer outline.Name it and save
Give the polygon a clear name, such as the site and parcel, and confirm. Each separate parcel gets its own polygon.Check the area
The Ruler (Tools › Ruler) has a polygon mode that measures the area of a shape. Compare it with the area you expect from title deeds or surveys; a large difference usually means a misplaced point.Export
Put the polygons in one folder, right-click the folder and choose Save Place As. Google Earth Pro writes a .kmz file, which contains the KML.
How to make a KML file in QGIS
QGIS is free GIS software and the better choice if the boundary already exists as a shapefile, GeoPackage or survey data, or if you have many parcels.
Load or digitise
If you have survey data or a shapefile, add it as a layer. To draw a new boundary, create a polygon layer, turn on editing, pick Add Polygon Feature, left-click each point and right-click to finish the shape. Save the layer edits.Check the geometry
Look for slivers, overlaps between parcels and self-crossing outlines before you export. Fixing them in QGIS is much easier than in a KML file.Export to KML
Right-click the layer and choose Export › Save Features As. Set the format to Keyhole Markup Language [KML], choose a file name, and check the CRS. KML stores longitude and latitude in decimal degrees.Open the result
Open the KML in Google Earth to check it sits on the right land. If it lands in the ocean, the coordinates were probably read in the wrong order or system.
The same applies to ArcGIS and other GIS tools: export the polygon layer to KML or KMZ and check it on imagery.
One boundary or several zones?
A project area often contains land with different roles: zones you will plant, trees you will add to farmland, land you will protect and land you leave as it is. A screening is more useful when it knows which is which. When you start a study on Feasibility.Earth, keep each part as a separate polygon and give each a role in the intake: planting, agroforestry, preservation or reference.
The anonymised sample study on our site shows why. Its boundary is a single polygon of 1,698 hectares of East African dryland, 1,608 of them eligible, with no zones and no treatment. So the report had to project carbon on all the eligible land at the IPCC regrowth rate and call the gross figure an upper bound. Drawing the planting, preservation and reference areas as separate polygons, each with a role, is what lets an estimate follow the real plan. See the 17 screenings for how the eligible share varied on other sites.
Common KML mistakes
| Mistake | What happens | Fix |
|---|---|---|
| Latitude and longitude swapped | The polygon lands in the wrong country or the ocean | KML order is longitude first; re-export from the GIS instead of editing by hand |
| Ring not closed | Some tools reject the polygon | The last point must repeat the first; redraw or let the GIS close it |
| Outline crosses itself | Area and overlay results are wrong | Redraw the crossing section or run a geometry check in QGIS |
| Overlapping parcels | Land is counted twice | Snap parcels to each other so edges meet without overlapping |
| A line instead of a polygon | There is no area to test | Draw with the polygon tool, not the path tool |
| Village, road or lake included | Shows up as an exclusion in the screening; must be cut out for registration | Fine for a first screening; cut it out with an inner ring or a separate polygon later |
Once the file looks right, the next step is to test the land inside it. The carbon feasibility study guide explains what a screening covers.
Frequently asked questions
The quickest way is Google Earth Pro, which is free: find your land, use the polygon tool above the map to click around the boundary point by point, give it a name and save the place. Google Earth Pro saves a KMZ file, which contains the KML. If you already have the boundary in a GIS such as QGIS, export the layer and choose KML as the format.
KML is a text format for geographic data, maintained as a standard by the Open Geospatial Consortium. A KMZ is a compressed package that contains a KML file and any files it uses. Google Earth reads both. For a feasibility screening either one works.
Yes, for AFOLU projects such as tree planting. The VCS Standard v4.7 (Section 3.11.2) requires a KML file with geodetic polygons that precisely delineate the project zone. Where it has several parcels, each parcel’s location details go into the project description. At the project start, the file must exclude non-eligible areas and areas outside the project area such as roads, water bodies and settlements.
For a screening, a boundary drawn carefully on satellite imagery is enough: the study maps forest history, built-up land, water and slopes inside whatever you draw. For registration the bar is higher, because the KML must precisely delineate the project zone and match the evidence of ownership or control.
Sources
- Verra: VCS Standard, v4.7 (16 April 2024), Section 3.11.2
- OGC: KML standard (versions 2.2 and 2.3)
- Google: KML reference (coordinates)
- Google: KML tutorial
- Google Earth Help: create travel routes or areas of interest; save places; measure distances and areas
- QGIS User Manual: creating new layers from an existing layer (Save Features As)